Master Specifications
Four Copy-Ready CSI Sections
Each section follows CSI MasterFormat structure: PART 1 GENERAL, PART 2 PRODUCTS (Materials), PART 3 EXECUTION (Installation), plus Quality assurance. Adapt the bracketed notes to your project before inserting into the project manual.
Master Specification — Molded FRP Grating
Compression-molded bi-directional grating: materials, resins, surfaces, supports, clip-up and acceptance criteria. CSI 05 52 13.13.
Open master specification →Master Specification — Pultruded FRP Grating
Pultruded I/T-bar grating: bar geometry, glass content, cross-rods, span design, clips, torque and thermal movement. CSI 05 52 13.16.
Open master specification →Master Specification — FRP Handrail
FRP guardrail and handrail systems: posts, rails, fittings, infill, mounting, loads and safety-guard criteria. CSI 05 51 00.
Open master specification →Master Specification — FRP Ladder
FRP fixed ladders and cages: rails, rungs, stand-offs, cage/well, fall-protection interface and installation. CSI 14 22 00.
Open master specification →Three Steps to a Project Spec
1 · Select the section
Choose the master spec matching the product (molded, pultruded, handrail, ladder). Use more than one where the project mixes grating with rail and access.
2 · Fill project notes
Insert your resin choice, color, load, span, fire rating and corrosivity. Delete options that do not apply and keep the mandatory clauses.
3 · Attach submittals
Reference the ZeAllgrate COA, load certificate and E84 report as submittal items in PART 1.
Need a Tailored Project Specification?
Send drawings and the corrosive/load/fire requirements — ZeAllgrate returns a completed spec section in Word format ready for your project manual.