Technical Library
Six Practical References
Each guide is a short, actionable reference — shorter than a white paper, longer than a blog post — built around a task: choosing, reading, specifying or installing.
FRP Grating Terminology Illustrated
The vocabulary of molded and pultruded grating explained: bearing bar, cross-rod, mesh, veil, grit top and more.
- Bearing bar, cross-rod, mesh and panel anatomy
- Resin families, glass types and veil
- Surface finishes and clip hardware
How to Read Load/Span Tables
Uniform vs. concentrated load, deflection limits, safety factors — with a fully worked reading example.
- Two load types: uniform (kN/m²) and concentrated (kN)
- Deflection limit selection L/100–L/200
- Worked 1.2 m walkway calculation
Resin Comparison: ISO / VE / Phenolic
Isophthalic, vinyl ester and phenolic compared side by side for chemistry, temperature, fire and cost.
- Resin matrix sets corrosion, heat and fire
- When vinyl ester is worth the premium
- Phenolic for fire/low-smoke duty
Surface Treatment Options
Concave, convex, grit-top, micro-mesh and meniscus finishes — where each belongs and the slip trade-offs.
- Concave vs. convex walking surface
- Grit-top for wet / oily footings
- Micro-mesh and meniscus options
Quality Control & Factory Testing
What a good factory inspects and tests before shipment: glass content, Barcol, dimensional, load and fire.
- Incoming resin/glass verification
- Barcol hardness, dimension and visual checks
- Load and fire test traceability
On-Site Fabrication: Cutting & Drilling
Safe field modification of FRP grating: tools, PPE, cutting, drilling, edge sealing and clip-up.
- Carbide-tipped tools and dust control
- Cutting, drilling and edge finishing
- Seal cut edges; re-clip after cuts
Guides vs. White Papers vs. Blog
Use the right format for the task.
Technical guides (here)
800–1500 word task references: how to read a table, what a term means, how to cut a panel. Practical and quick.
White papers
1500–2500 word engineering analyses with formulas, matrices and references: structural design, fire, LCC, chemistry, connections.
Blog
Short industry and practice articles: applications, manufacturing, comparisons and field lessons.
How to Use This Library
The technical library is organised for the working day: start with Terminology Illustrated to align vocabulary, then read How to Read Load/Span Tables before any sizing work. When you move to specification, the Resin Comparison, Surface Treatment Options and QC & Factory Testing guides carry the data tables specifiers quote. Field work — cutting, drilling and installation — starts with On-Site Fabrication. Each guide is written as a standalone reference with its data tables, so a buyer or engineer can jump straight to the topic at hand.
Guides vs. White Papers vs. Blog
- Technical library — practical references for daily specification and installation work.
- White papers — deep engineering analyses (load design, corrosion, lifecycle cost) for design decisions.
- Blog — shorter articles on selection, comparison and field practice, including the phase libraries.
- Technical library — practical references for daily specification and installation work.
- White papers — deep engineering analyses (load design, corrosion, lifecycle cost) for design decisions.
- Blog — shorter articles on selection, comparison and field practice, including the phase libraries.
Need a Custom Technical Submission?
Send your drawings, chemicals, spans and loads — ZeAllgrate returns a datasheet and load verification suitable for your bid file.